Cable Assemblies
Amphenol’s cable assemblies include simple point-to-point cables, custom high-power and high-speed data cable assemblies and complex multi-branch harness assembly for large systems across a broad range of end markets. Our cable assemblies include the latest industry innovations in radio frequency (RF), fiber optics, high-power requirements and high-speed data transfer for the newest systems and applications. In addition, our broad portfolio of cable connectors and accessories can be used in our cable assemblies to provide a complete solution.
View our businesses providing Cable Assemblies solutions.
Driver Assistance Components
RF Connectors for transmitting LVDS and Multi-Gig-Ethernet. We offer cable assembly solutions needed to transfer data within a vehicle. These are used to connect cameras, antennas as well as Radar/Lidar systems and enable scanning of the area for semi-autonomous and autonomous driving.
Electrical Plates
Electrical plates for busses, electrobusses, trolleybusses, railway vehicles, including fuses, circuit breakers, relays, and ECUs connected by wire harnesses.
eMobility Harness & Components - North America
Interconnect products for eMobility applications. HV / HP Connectors, Interfaces, Cable Assemblies, Bus Bars, MSD, Vehicle Inlets, PDUs, customized interconnect solutions. Compact low voltage and high voltages harness solutions meet demands of 1000 V DC and up to 450 A.
Energy Management Components
High Voltage Applications - We manufacture customized high-voltage wiring harnesses using Amphenol contact systems. The HV interfaces are specially designed for use in sophisticated applications and are suitable for all temperature ranges of the vehicle. Advantages in terms of size, weight, and power density can be realized.
Engine & Ancillary Components
Connecting Cable for Engine Cooling - The connectors, including the seal, are automatically over-moulded in production cells with lead frame and liquid silicone LSR. Special process steps create the connection to the lead frame, strain reliefs, and longitudinal water tightness.
EWIS Harness Electrical Wiring & Interconnect System.
EWIS Harnesses are designed to make the connection of Low Voltage Signals, Power Distribution, RF signals <2GHz, and Fiber Optic; in pressurized or unpressurized sections; in-cabin, cockpit, avionic bay, or even on Space applications. We hold Part21G and PART145 certificates for production and maintenance. We support product design and certification by delivering full documentation.
ExaMAX® 56Gb/s High Speed Backplane Cable Assembly
The ExaMAX® I/O system offers cable assemblies and I/O connector solutions for both internal and external applications. ExaMAX® I/O products are capable of delivering high-speed performance of 25 Gb/s per channel with a path to 40 Gb/s and higher. The ExaMAX® I/O system delivers superior linear board signal density and meets the performance requirements of the OIF-CEI-25G-LR industry standard.
Exhaust Cleaning Harness
Exhaust Gas Sensor - Signals are transmitted between NOx sensors and control electronics using our connection system. Special contact and housing materials are able to resist high exhaust-gas temperatures. By developing our own systems, we achieve low and steady contact resistances, which are needed for the transmission of sensor currents.
Exterior Lighting Harness
Customized Lighting Harness, License Plate Harness
Extremeport-Flash
Amphenol’s Extremeport-Flash is an extreme low mating height, easy-to-release high-speed cable solution. We designed 95ohm Flash mainly to support near chip (under heat sink) to IO application, and the mating height is lower than 5mm. Flash can support 56G PAM4, and scalable to 112G PAM4 application, and plug is with pull tab design feature for easy release.
Extremeport-MCIO(Mini Cooledge IO)
Amphenol's Mini Cooledge IO(MCIO) is a high-speed, small mechanical size cable solution. Amphenol MCIO product is now being specified in the SFF group and the project number is SFF-TA-1016. MCIO cable can support PCIe Gen5, and is scalable to PCIe Gen6 and 112G PAM4. We developed 85ohm and 95ohm solutions to support different applications.
Extremeport-Swift
Amphenol’s Extremeport-Swift is an extreme low profile(mating height<9mm), robust mechanical, and excellent SI performance cable solution. The cable assembly and connector can support PCIe Gen5, and the SI performance is scalable to PCIe Gen6 and 112G PAM4. We can provide straight, right angle, and side exit plug types with 38pin, 74pin, and 124pin to support customers to optimize system layout.
Extremeport-Z-Link(Gen Z)
Amphenol’s Extremeport Z-Link(Gen Z ) Connector is a scalable connector and connector interface compliant to SNIA: SFF-TA-1002. Z-Link can support PCIe Gen5, and is scalable to PCIe Gen6 and 112G PAM4. Z-Link can support high speed and power in one connector, and we developed 1C, 2C, 4C, and 4C+ connectors to support customers' different applications.
Extreme RF Cable Assemblies
Amphenol SV Microwave offers a complete line of fixed length, high-frequency Ø.047" and Ø.085" cable assemblies in series: SMA, 2.92mm, 2.4mm, 1.85mm, SMP, & SMPM. These assemblies feature low solder wicking, and the high flexibility allows for tight bends behind the cable ferrule. Our low loss is your gain!
F2X Fiber Optic Building Entry Point
The building entry point (BEP) enables easy connection of buildings to your fiber optic network. The BEP can accommodate different numbers of fibers according to your needs. With the patented F2X® solution you are able to connect and measure FTTX installations faster.
FAKRA Cable Assemblies North America
Coaxial cable solutions used for data transmission and video processing, including options for environments requiring high flexibility and high temperatures
Fiber Optic Data Center Trunk Cable
Trunk cables are used for fixed cabling between network cabinets. Pre-assembled with URM, MPO, or MDC it's application-independent and system-oriented. Especially the URM connector fits perfectly into Base8 cabling systems which are suitable for current and future transmission standards. Smart fixing of the trunk cable in distribution technology due to the integrated cable gland on the divider.
Fiber Optic Fanout Cable
Fanout cables are used for fixed cabling between network cabinets, mainly for breakout applications. System-oriented connector combinations make them application-independent and suitable for all Ethernet and Fibre Channel applications. Usually, 8-fold, 12-fold and 24-fold fanout cable assembled with MPO connectors one side and any common connector type on the other side could be provided.
Fiber Optic Loose Tube Cable
With the pre-assembled loose tube cable, it is possible to connect your distribution technology to protected indoor or outdoor areas. Depending on the application, there is a suitable jacket for robust multi-fiber cable. Various connectors like LC, SC, or E2000 are possible with up to 96 fibers. Jelly-free constructions are available for the lowest fire load.
Fiber Optic Patch Cord
With the patch cords, it is possible to connect your active devices and distribution technology on short distances in the protected indoor area. Due to the lower cable load, more cables can be handled in the same space. Available with different connectors, like LC, SC, or URM, different cables, and fiber number and types.